Links: Table of Contents | Single HTML

Chapter 6. Reactive JAX-RS Client API

Warning

Jersey 2.26 (JAX-RS 2.1 implementation) dropped Jersey-proprietary API in favor of JAX-RS 2.1 Reactive Client API.

Reactive client extension is quite a generic API allowing end users to utilize the popular reactive programming model when using JAX-RS Client. The API is designed to be extensible, so any existing reactive framework can integrate with it and there is build in support for CompletionStage. Along with describing the API itself, this section also covers existing extension modules and provides hints to implement a custom extension if needed.

If you are not familiar with the JAX-RS Client API, it is recommended that you see Chapter 5, Client API where the basics of JAX-RS Client API along with some advanced techniques are described.

6.1. Motivation for Reactive Client Extension

The Problem

Imagine a travel agency whose information system consists of multiple basic services. These services might be built using different technologies (JMS, EJB, WS, ...). For simplicity we presume that the services can be consumed using REST interface via HTTP method calls (e.g. using a JAX-RS Client). We also presume that the basic services we need to work with are:

  • Customers service – provides information about customers of the travel agency.

  • Destinations service – provides a list of visited and recommended destinations for an authenticated customer.

  • Weather service – provides weather forecast for a given destination.

  • Quoting service – provides price calculation for a customer to travel to a recommended destination.

The task is to create a publicly available feature that would, for an authenticated user, display a list of 10 last visited places and also display a list of 10 new recommended destinations including weather forecast and price calculations for the user. Notice that some of the requests (to retrieve data) depend on results of previous requests. E.g. getting recommended destinations depends on obtaining information about the authenticated user first. Obtaining weather forecast depends on destination information, etc. This relationship between some of the requests is an important part of the problem and an area where you can take a real advantage of the reactive programming model.

One way how to obtain data is to make multiple HTTP method calls from the client (e.g. mobile device) to all services involved and combine the retrieved data on the client. However, since the basic services are available in the internal network only we'd rather create a public orchestration layer instead of exposing all internal services to the outside world. The orchestration layer would expose only the desired operations of the basic services to the public. To limit traffic and achieve lower latency we'd like to return all the necessary information to the client in a single response.

The orchestration layer is illustrated in the Figure 6.1. The layer accepts requests from the outside and is responsible of invoking multiple requests to the internal services. When responses from the internal services are available in the orchestration layer they're combined into a single response that is sent back to the client.

Figure 6.1. Travel Agency Orchestration Service

Travel Agency Orchestration Service


The next sections describe various approaches (using JAX-RS Client) how the orchestration layer can be implemented.

A Naive Approach

The simplest way to implement the orchestration layer is to use synchronous approach. For this purpose we can use JAX-RS Client Sync API (see Example 6.1, “Excerpt from a synchronous approach while implementing the orchestration layer”). The implementation is simple to do, easy to read and straightforward to debug.

Example 6.1. Excerpt from a synchronous approach while implementing the orchestration layer

final WebTarget destination = ...;
final WebTarget forecast = ...;

// Obtain recommended destinations.
List<Destination> recommended = Collections.emptyList();
try {
    recommended = destination.path("recommended").request()
            // Identify the user.
            .header("Rx-User", "Sync")
            // Return a list of destinations.
            .get(new GenericType<List<Destination>>() {});
} catch (final Throwable throwable) {
    errors.offer("Recommended: " + throwable.getMessage());
}

// Forecasts. (depend on recommended destinations)
final Map<String, Forecast> forecasts = new HashMap<>();
for (final Destination dest : recommended) {
    try {
        forecasts.put(dest.getDestination(),
                forecast.resolveTemplate("destination", dest.getDestination()).request().get(Forecast.class));
    } catch (final Throwable throwable) {
        errors.offer("Forecast: " + throwable.getMessage());
    }
}


The downside of this approach is its slowness. You need to sequentially process all the independent requests which means that you're wasting resources. You are needlessly blocking threads, that could be otherwise used for some real work.

If you take a closer look at the example you can notice that at the moment when all the recommended destinations are available for further processing we try to obtain forecasts for these destinations. Obtaining a weather forecast can be done only for a single destination with a single request, so we need to make 10 requests to the Forecast service to get all the destinations covered. In a synchronous way this means getting the forecasts one-by-one. When one response with a forecast arrives we can send another request to obtain another one. This takes time. The whole process of constructing a response for the client can be seen in Figure 6.2.

Let's try to quantify this with assigning an approximate time to every request we make to the internal services. This way we can easily compute the time needed to complete a response for the client. For example, obtaining

  • Customer details takes 150 ms

  • Recommended destinations takes 250 ms

  • Price calculation for a customer and destination takes 170 ms (each)

  • Weather forecast for a destination takes 330 ms (each)

When summed up, 5400 ms is approximately needed to construct a response for the client.

Figure 6.2. Time consumed to create a response for the client – synchronous way

Time consumed to create a response for the client – synchronous way


Synchronous approach is better to use for lower number of requests (where the accumulated time doesn't matter that much) or for a single request that depends on the result of previous operations.

Optimized Approach

The amount of time needed by the synchronous approach can be lowered by invoking independent requests in parallel. We're going to use JAX-RS Client Async API to illustrate this approach. The implementation in this case is slightly more difficult to get right because of the nested callbacks and the need to wait at some points for the moment when all partial responses are ready to be processed. The implementation is also a little bit harder to debug and maintain. The nested calls are causing a lot of complexity here. An example of concrete Java code following the asynchronous approach can be seen in Example 6.2, “Excerpt from an asynchronous approach while implementing the orchestration layer”.

Example 6.2. Excerpt from an asynchronous approach while implementing the orchestration layer

final WebTarget destination = ...;
final WebTarget forecast = ...;

// Obtain recommended destinations. (does not depend on visited ones)
destination.path("recommended").request()
        // Identify the user.
        .header("Rx-User", "Async")
        // Async invoker.
        .async()
        // Return a list of destinations.
        .get(new InvocationCallback<List<Destination>>() {
            @Override
            public void completed(final List<Destination> recommended) {
                final CountDownLatch innerLatch = new CountDownLatch(recommended.size());

                // Forecasts. (depend on recommended destinations)
                final Map<String, Forecast> forecasts = Collections.synchronizedMap(new HashMap<>());
                for (final Destination dest : recommended) {
                    forecast.resolveTemplate("destination", dest.getDestination()).request()
                            .async()
                            .get(new InvocationCallback<Forecast>() {
                                @Override
                                public void completed(final Forecast forecast) {
                                    forecasts.put(dest.getDestination(), forecast);
                                    innerLatch.countDown();
                                }

                                @Override
                                public void failed(final Throwable throwable) {
                                    errors.offer("Forecast: " + throwable.getMessage());
                                    innerLatch.countDown();
                                }
                            });
                }

                // Have to wait here for dependent requests ...
                try {
                    if (!innerLatch.await(10, TimeUnit.SECONDS)) {
                        errors.offer("Inner: Waiting for requests to complete has timed out.");
                    }
                } catch (final InterruptedException e) {
                    errors.offer("Inner: Waiting for requests to complete has been interrupted.");
                }

                // Continue with processing.
            }

            @Override
            public void failed(final Throwable throwable) {
                errors.offer("Recommended: " + throwable.getMessage());
            }
        });


The example is a bit more complicated from the first glance. We provided an InvocationCallback to async get method. One of the callback methods (completed or failed) is called when the request finishes. This is a pretty convenient way to handle async invocations when no nested calls are present. Since we have some nested calls (obtaining weather forecasts) we needed to introduce a CountDownLatch synchronization primitive as we use asynchronous approach in obtaining the weather forecasts as well. The latch is decreased every time a request, to the Forecasts service, completes successfully or fails. This indicates that the request actually finished and it is a signal for us that we can continue with processing (otherwise we wouldn't have all required data to construct the response for the client). This additional synchronization is something that was not present when taking the synchronous approach, but it is needed here.

Also the error processing can not be written as it could be in an ideal case. The error handling is scattered in too many places within the code, that it is quite difficult to create a comprehensive response for the client.

On the other hand taking asynchronous approach leads to code that is as fast as it gets. The resources are used optimally (no waiting threads) to achieve quick response time. The whole process of constructing the response for the client can be seen in Figure 6.3. It only took 730 ms instead of 5400 ms which we encountered in the previous approach.

Figure 6.3. Time consumed to create a response for the client – asynchronous way

Time consumed to create a response for the client – asynchronous way


As you can guess, this approach, even with all it's benefits, is the one that is really hard to implement, debug and maintain. It's a safe bet when you have many independent calls to make but it gets uglier with an increasing number of nested calls.

Reactive Approach

Reactive approach is a way out of the so-called Callback Hell which you can encounter when dealing with Java's Futures or invocation callbacks. Reactive approach is based on a data-flow concept and the execution model propagate changes through the flow. An example of a single item in the data-flow chain can be a JAX-RS Client HTTP method call. When the JAX-RS request finishes then the next item (or the user code) in the data-flow chain is notified about the continuation, completion or error in the chain. You're more describing what should be done next than how the next action in the chain should be triggered. The other important part here is that the data-flows are composable. You can compose/transform multiple flows into the resulting one and apply more operations on the result.

An example of this approach can be seen in Example 6.3, “Excerpt from a reactive approach while implementing the orchestration layer”. The APIs would be described in more detail in the next sections.

Example 6.3. Excerpt from a reactive approach while implementing the orchestration layer

final WebTarget destination = ...;
final WebTarget forecast = ...;

// Recommended places.
CompletionStage<List<Destination>> recommended =
        destination.path("recommended")
                   .request()
                   // Identify the user.
                   .header("Rx-User", "CompletionStage")
                   // Reactive invoker.
                   .rx()
                   // Return a list of destinations.
                   .get(new GenericType<List<Destination>>() {})
                   .exceptionally(throwable -> {
                       errors.offer("Recommended: " + throwable.getMessage());
                       return Collections.emptyList();
                   });

// get Forecast for recommended destinations.
return recommended.thenCompose(destinations -> {

    List<CompletionStage<Recommendation>> recommendations = destinations.stream().map(destination -> {
    // For each destination, obtain a weather forecast ...
    final CompletionStage<Forecast> forecastResult =
            forecast.resolveTemplate("destination", destination.getDestination())
                    .request().rx().get(Forecast.class)
                    .exceptionally(throwable -> {
                        errors.offer("Forecast: " + throwable.getMessage());
                        return new Forecast(destination.getDestination(), "N/A");
                    });

                    //noinspection unchecked
                    return CompletableFuture.completedFuture(new Recommendation(destination))
                                            // Set forecast for recommended destination.
                                            .thenCombine(forecastResult, Recommendation::forecast)
                    }).collect(Collectors.toList());

                    // Transform List<CompletionStage<Recommendation>> to CompletionStage<List<Recommendation>>
                    return sequence(recommendations);
    });


As you can see the code achieves the same work as the previous two examples. It's more readable than the pure asynchronous approach even though it's equally fast. It's as easy to read and implement as the synchronous approach. The error processing is also better handled in this way than in the asynchronous approach.

When dealing with a large amount of requests (that depend on each other) and when you need to compose/combine the results of these requests, the reactive programming model is the right technique to use.

6.2. Usage and Extension Modules

Reactive Client API is part of the JAX-RS specification since version 2.1.

When you compare synchronous invocation of HTTP calls ( Example 6.4, “Synchronous invocation of HTTP requests”)

Example 6.4. Synchronous invocation of HTTP requests

Response response = ClientBuilder.newClient()
        .target("http://example.com/resource")
        .request()
        .get();


with asynchronous invocation (Example 6.5, “Asynchronous invocation of HTTP requests”)

Example 6.5. Asynchronous invocation of HTTP requests

Future<Response> response = ClientBuilder.newClient()
        .target("http://example.com/resource")
        .request()
        .async()
        .get();


it is apparent how to pretty conveniently modify the way how a request is invoked (from sync to async) only by calling async method on an Invocation.Builder.

Naturally, it'd be nice to copy the same pattern to allow invoking requests in a reactive way. Just instead of async you'd call rx on an extension of Invocation.Builder, like in Example 6.6, “Reactive invocation of HTTP requests”.

Example 6.6. Reactive invocation of HTTP requests

CompletionStage<Response> response = ClientBuilder.newClient()
        .target("http://example.com/resource")
        .request()
        .rx()
        .get();


The first reactive interface in the invocation chain is RxInvoker which is very similar to SyncInvoker and AsyncInvoker. It contains all methods present in the two latter JAX-RS interfaces but the RxInvoker interface is more generic, so that it can be extended and used in particular implementations taking advantage of various reactive libraries. Extending this new interface in a particular implementation also preserves type safety which means that you're not loosing type information when a HTTP method call returns an object that you want to process further.

The method "rx()" in the example above is perfect example of that principle. It returns CompletionStageRxInvoker, which extends RxInvoker.

As a user of the Reactive Client API you only need to keep in mind that you won't be working with RxInvoker directly. You'd rather be working with an extension of this interface created for a particular implementation and you don't need to be bothered much with why are things designed the way they are.

Note

To see how the RxInvoker should be extended, refer to Section 6.4, “Implementing Support for Custom Reactive Libraries (SPI)”.

The important thing to notice here is that an extension of RxInvoker holds the type information and the Reactive Client needs to know about this type to properly propagate it among the method calls you'll be making. This is the reason why other interfaces (described bellow) are parametrized with this type.

In order to extend the API to be used with other reactive frameworks, RxInvokerProvider needs to be registered into the Client runtime:

Client client = ClientBuilder.newClient();
client.register(RxFlowableInvokerProvider.class);

Flowable<String> responseFlowable =
        client.target("http://jersey.java.net")
              .request()
              .rx(RxFlowableInvoker.class)
              .get(String.class);

String responseString = responseFlowable.blockingFirst();

Dependencies

JAX-RS mandates support for CompletionStage, which doesn't required any other dependency and can be used out of the box.

To add support for a particular library, see the Section 6.3, “Supported Reactive Libraries”.

Note

If you're not using Maven (or other dependency management tool) make sure to add also all the transitive dependencies of Jersey client module and any other extensions (when used) on the class-path.

6.3. Supported Reactive Libraries

There are already some available reactive (or reactive-like) libraries out there and Jersey brings support for some of them out of the box. Jersey currently supports:

6.3.1. RxJava – Observable

RxJava, contributed by Netflix, is probably the most advanced reactive library for Java at the moment. It's used for composing asynchronous and event-based programs by using observable sequences. It uses the observer pattern to support these sequences of data/events via its Observable entry point class which implements the Reactive Pattern. Observable is actually the parameter type in the RxJava's extension of RxInvoker, called RxObservableInvoker. This means that the return type of HTTP method calls is Observable in this case (accordingly parametrized).

Requests are by default invoked at the moment when a subscriber is subscribed to an observable (it's a cold Observable). If not said otherwise a separate thread (JAX-RS Async Client requests) is used to obtain data. This behavior can be overridden by providing an ExecutorService when a reactive Client is created.

Usage

The extensibility is built-in JAX-RS Client API, so there are no special dependencies on Jersey Client API other than the extension itself.

Example 6.7. Creating JAX-RS Client with RxJava reactive extension

// New Client
Client client = ClientBuilder.newClient();
client.register(RxObservableInvokerProvider.class);


An example of obtaining Observable with JAX-RS Response from a remote service can be seen in Example 6.8, “Obtaining Observable<Response> from Jersey/RxJava Client”.

Example 6.8. Obtaining Observable<Response> from Jersey/RxJava Client

Observable<Response> observable = RxObservable.newClient()
                                                    .target("http://example.com/resource")
                                                    .request()
                                                    .rx(RxObservableInvoker.class)
                                                    .get();


Dependencies

The RxJava support is available as an extension module in Jersey. For Maven users, simply add the following dependency to your pom.xml:

<dependency>
    <groupId>org.glassfish.jersey.ext.rx</groupId>
    <artifactId>jersey-rx-client-rxjava</artifactId>
    <version>3.0.0</version>
</dependency>

After this step you can use the extended client right away. The dependency transitively adds the following dependencies to your class-path as well: io.reactivex:rxjava.

Note

If you're not using Maven (or other dependency management tool) make sure to add also all the transitive dependencies of this extension module (see jersey-rx-client-rxjava) on the class-path.

6.3.2. RxJava – Flowable

RxJava, contributed by Netflix, is probably the most advanced reactive library for Java at the moment. It's used for composing asynchronous and event-based programs by using observable sequences. It uses the observer pattern to support these sequences of data/events via its Flowable entry point class which implements the Reactive Pattern. Flowable is actually the parameter type in the RxJava's extension of RxInvoker, called RxFlowableInvoker. This means that the return type of HTTP method calls is Flowable in this case (accordingly parametrized).

Requests are by default invoked at the moment when a subscriber is subscribed to a flowable (it's a cold Flowable). If not said otherwise a separate thread (JAX-RS Async Client requests) is used to obtain data. This behavior can be overridden by providing an ExecutorService when a reactive Client is created.

Usage

The extensibility is built-in JAX-RS Client API, so there are no special dependencies on Jersey Client API other than the extension itself.

Example 6.9. Creating JAX-RS Client with RxJava2 reactive extension

// New Client
Client client = ClientBuilder.newClient();
client.register(RxFlowableInvokerProvider.class);


An example of obtaining Flowable with JAX-RS Response from a remote service can be seen in Example 6.8, “Obtaining Observable<Response> from Jersey/RxJava Client”.

Example 6.10. Obtaining Flowable<Response> from Jersey/RxJava Client

Flowable<Response> observable = RxObservable.newClient()
                            .target("http://example.com/resource")
                            .request()
                            .rx(RxFlowableInvoker.class)
                            .get();
                        


Dependencies

The RxJava support is available as an extension module in Jersey. For Maven users, simply add the following dependency to your pom.xml:

<dependency>
    <groupId>org.glassfish.jersey.ext.rx</groupId>
    <artifactId>jersey-rx-client-rxjava2</artifactId>
    <version>3.0.0</version>
</dependency>

After this step you can use the extended client right away. The dependency transitively adds the following dependencies to your class-path as well: io.reactivex:rxjava2.

Note

If you're not using Maven (or other dependency management tool) make sure to add also all the transitive dependencies of this extension module (see jersey-rx-client-rxjava2) on the class-path.

6.3.3. Guava – ListenableFuture and Futures

Guava, contributed by Google, also contains a type, ListenableFuture, which can be decorated with listeners that are notified when the future completes. The ListenableFuture can be combined with Futures to achieve asynchronous/event-based completion aware processing. ListenableFuture is the parameter type in the Guava's extension of RxInvoker, called RxListenableFutureInvoker. This means that the return type of HTTP method calls is ListenableFuture in this case (accordingly parametrized).

Requests are by default invoked immediately. If not said otherwise the Executors#newCachedThreadPool() pool is used to obtain a thread which processed the request. This behavior can be overridden by providing a ExecutorService when a Client is created.

Usage

The extensibility is built-in JAX-RS Client API, so there are no special dependencies on Jersey Client API other than the extension itself.

Example 6.11. Creating Jersey/Guava Client

// New Client
Client client = ClientBuilder.newClient();
client.register(RxListenableFutureInvokerProvider.class);


An example of obtaining ListenableFuture with JAX-RS Response from a remote service can be seen in Example 6.12, “Obtaining ListenableFuture<Response> from Jersey/Guava Client”.

Example 6.12. Obtaining ListenableFuture<Response> from Jersey/Guava Client

ListenableFuture<Response> response = client.target("http://jersey.java.net")
                                            .request()
                                            .rx(RxListenableFutureInvoker.class)
                                            .get();


Dependencies

The Reactive Jersey Client with Guava support is available as an extension module in Jersey. For Maven users, simply add the following dependency to your pom.xml:

<dependency>
    <groupId>org.glassfish.jersey.ext.rx</groupId>
    <artifactId>jersey-rx-client-guava</artifactId>
    <version>3.0.0</version>
</dependency>

After this step you can use the extended client right away. The dependency transitively adds the following dependencies to your class-path as well: com.google.guava:guava.

Note

If you're not using Maven (or other dependency management tool) make sure to add also all the transitive dependencies of this extension module (see jersey-rx-client-guava) on the class-path.

6.4. Implementing Support for Custom Reactive Libraries (SPI)

In case you want to bring support for some other library providing Reactive Programming Model into your application you can extend functionality of Reactive JAX-RS Client by implementing RxInvokerProvider, registering that implementation into the client runtime and then using rx(Class<T>) in your code.

Implement RxInvoker and RxInvokerProvider interfaces

The first step when implementing support for another reactive library is to implement RxInvoker. JAX-RS API itself contains one implementation, which will be used as an example: CompletionStageRxInvoker.

Example 6.13. Extending RxIvoker

public interface CompletionStageRxInvoker extends RxInvoker<CompletionStage> {
    @Override
    public CompletionStage<Response> get();

    @Override
    public <T> CompletionStage<T> get(Class<T> responseType);

    // ...
}


The important fact to notice is that the generic parameter of RxInvoker is CompletionStage and also that the return type is overriden to be always CompletionStage with some generic param (Response; or T).

After having the extended RxInvoker interface, the implementor has to provide RxInvokerProvider, which will be registered as an provider to a client instance.

Example 6.14. Extending RxInvokerProvider

public static class CompletionStageRxInvokerProvider implements RxInvokerProvider<CompletionStageRxInvoker> {
    @Override
    public boolean isProviderFor(Class<?%gt; clazz) {
        return CompletionStage.class.equals(clazz);
    }

    @Override
    public CompletionStageRxInvoker getRxInvoker(SyncInvoker syncInvoker, ExecutorService executorService) {
        return new CompletionStageRxInvoker() {
            // ...
        };
    }
}

Example of using custom RxInvokerProvider

Considering the work above was done and the implementation of custom RxInvoker and RxInvokerProvider is available, the client code using those extensions will be:

Client client = ClientBuilder.newClient();
// register custom RxInvokerProvider
client.register(CompletionStageRxInvokerProvider.class);

CompletionStage<Response> response =
        client.target("http://jersey.java.net")
              .request()
              .rx(CompletionStageRxInvoker.class)
              // Now we have an instance of CompletionStageRxInvoker returned from our registered RxInvokerProvider,
              // which is CompletionStageRxInvokerProvider in this particular scenario.
              .get();